- Max. Turning Length 510+40mm
- Spindle Bore Dia. 66mm
- 30-degree slant bed saddle structure
- Equipped with reinforced P3-class ball screws
- Z-axis adopts a configuration with six sliders
- Equipped with a hardened Y-axis power turret
| Item | Specification |
| Processing Range | |
| Maximum Spindle Rotation Diameter | 600mm |
| Maximum Processing Diameter of Main Spindle Disc | 320mm |
| Maximum Processing Diameter of Sub Spindle Disc | 300mm |
| Maximum Turning Length (One Clamping, One Tailstock) | 510mm + Back Tool 40mm |
| Maximum Milling Length (One Clamping, One Tailstock) | 550mm |
| Maximum Distance from Main Spindle Jaw to Sub Spindle Jaw | 530mm |
| Minimum Distance from Main Spindle Jaw to Sub Spindle Jaw | 30mm |
| Minimum Distance from Main Jaw to Tool Disc | -110mm |
| Maximum Distance from Main Jaw to Tool Disc | 510mm |
| Main Spindle | |
| Spindle Structure | Permanent Magnet Synchronous Electric Spindle |
| Spindle Nose Type | A2-6 |
| Spindle Through Hole | φ66mm |
| Maximum Spindle Speed | 0-4500r/min |
| Sub Spindle | |
| Spindle Structure | Permanent Magnet Synchronous Electric Spindle |
| Spindle Nose Type | A2-5 |
| Spindle Through Hole | φ56mm |
| Maximum Spindle Speed | 0-5000r/min |
| Feed | |
| Feed Motor Flange | Type 130/174 |
| X-Axis Guide Rail Model | 35 Roller |
| Y-Axis Guide Rail Model | 35 Roller |
| Z-Axis Guide Rail Model | 45 Roller |
| ZB-Axis Guide Rail Model | 35 Roller |
| X-Axis Ball Screw Model | 3210-C3 |
| Y-Axis Ball Screw Model | 3210-C3 |
| Z-Axis Ball Screw Model | 3210-C3 |
| ZB-Axis Feed Ball Screw | 3210-C3 |
| Ball Screw Bearing | 2562-P4 |
| Travel | |
| X-Axis Maximum Travel (Tool Disc Size 330mm) | 260mm (﹣110mm to ﹢150mm) |
| Y-Axis Maximum Travel | ﹢58 to ﹣58mm |
| Z-Axis Maximum Travel | 620mm |
| ZB-Axis Maximum Travel | 500mm |
| Rapid Traverse Speed | |
| X-Axis Rapid Positioning | ≤24m/min |
| Y-Axis Rapid Positioning | ≤10m/min |
| Z-Axis Rapid Positioning | ≤24m/min |
| ZB-Axis Rapid Positioning | ≤10m/min |
| Accuracy | |
| X-Axis Repeat Positioning | ±0.003mm |
| Y-Axis Repeat Positioning | ±0.003mm |
| Z-Axis Repeat Positioning | ±0.003mm |
| ZB-Axis Repeat Positioning | ±0.003mm |
| Item | Specification |
| External Protection Sheet Metal | Full Surround Protection |
| Internal Protection Sheet Metal | Stainless Steel Full Protection |
| Chip Conveyor | Rear Discharge, Integrated Water Tank and Chip Conveyor |
| Rotary Cylinder | 8-inch Hollow with 52mm Through Hole |
| Hydraulic Chuck | A2-6 (8-inch) |
| Spindle Pull Rod | M60*2-M60*2, Through Hole φ52mm |
| Sub-Spindle Rotary Cylinder | 6-inch Solid |
| Sub-Spindle Hydraulic Chuck | A2-5 (6-inch) |
| Sub-Spindle Pull Rod | M55*2-M55*2, Through Hole φ46mm |
| X-Axis Coupling | Ball Screw End φ22mm / Total Length 80mm |
| Y-Axis Coupling | Ball Screw End φ22mm / Total Length 80mm |
| Z-Axis Coupling | Ball Screw End φ22mm / Total Length 80mm |
| ZB-Axis Coupling | Ball Screw End φ22mm / Total Length 80mm |
| Power Tool Turret | BMT55-12 Position, Power Tool Turret Brand: Taiwan Jin Gang Xin. Includes 8 fixed tool holders, excluding power tool holders |
| Hydraulic Station | 2HP, Five-Port, 50L Capacity |
| Oil Mist Electric Lubrication Pump | Single-Phase 220V, 4L, Detection Volume Type |
| Water Pump | Three-Phase 380V, Immersion Circulation Pump |
Home
Tel
Contact
E-mail