- Max. Turning Length 550mm
- Spindle Bore Dia. 66mm
- Equipped with a hardened Y-axis power turret
- Equipped with reinforced P3-class ball screws
- Z-axis adopts a configuration with six sliders
| Category | Specification | Option 1 |
| Processing Range | Maximum Turning Diameter | 600mm |
| Maximum Disc Processing Diameter | 340mm | |
| Maximum Turning Length | 550mm | |
| Maximum Milling Length | 620mm | |
| Minimum Distance Between Chuck and Tool Disk | -70mm | |
| Maximum Distance Between Chuck and Tool Disk | 550mm | |
| Table Center Height | 100mm | |
| Table Size | 488mm * 388mm | |
| Spindle | Spindle Structure | High-rigidity boxed mechanical spindle (Japan KOYO) |
| Spindle Nose Type | A2-6 | |
| Spindle Through Hole | φ66mm | |
| Maximum Spindle Speed | 0-4500r/min | |
| Spindle Pulley Teeth | 8YU | |
| Tailstock | Tailstock Model | MT4 (fixed center) |
| Tailstock Stroke | Hydraulic programmable 420mm | |
| Maximum Distance Between Chuck and Tailstock | 630mm | |
| Feed System | Feed Motor Flange | 130 type / 174 type |
| X-axis Guide Model | 35 roller (THK) | |
| Y-axis Guide Model | 35 roller (THK) | |
| Z-axis Guide Model | 45 roller (THK) | |
| Tailstock Guide Model | 35 roller (Cate) | |
| X-axis Ball Screw Model | 3210-C3 (THK) | |
| Y-axis Ball Screw Model | 3210-C3 (THK) | |
| Z-axis Ball Screw Model | 4010-C3 (PMI) / 3210-C3 (THK) | |
| Ball Screw Bearing | 2562-P4 (NACHI) | |
| Travel | X-axis Maximum Travel (330mm Tool Disk) | 260mm (-110mm to +150mm) |
| Y-axis Maximum Travel (85mm Center Height) | +58 to -50mm | |
| Y-axis Maximum Travel (100mm Center Height) | +58 to -58mm | |
| Z-axis Maximum Travel | 620mm | |
| Rapid Traverse Speed | X-axis Rapid Traverse | ≤24m/min |
| Y-axis Rapid Traverse | ≤10m/min | |
| Z-axis Rapid Traverse | ≤24m/min | |
| Tailstock Rapid Traverse | ≤10m/min | |
| Precision | X-axis Repeat Positioning Accuracy | ±0.003mm |
| Y-axis Repeat Positioning Accuracy | ±0.003mm | |
| Z-axis Repeat Positioning Accuracy | ±0.003mm |
| Standard Accessories | |
| Power Turret | BMT55-12 (Tool disk size: 330mm, 8 fixed tool positions, no power tool positions) |
| External Guarding Sheet Metal | Full enclosure |
| Internal Guarding Sheet Metal | Full stainless steel protection |
| Chip Conveyor | Rear exit, integrated with water tank |
| Spindle Brake | HT500 - 4 pistons |
| Spindle Pull Rod | M60*2-M60*2, through-hole φ52mm |
| Rotary Oil Cylinder | 8-inch hollow, 52mm through-hole |
| Hydraulic Chuck | A2-6 (8 inches) |
| Hydraulic Station | 2HP, five-way, 50L capacity |
| X-axis Coupling | Screw end φ22mm, total length 80mm |
| Y-axis Coupling | Screw end φ22mm, total length 80mm |
| Z-axis Coupling | Screw end φ22mm, total length 80mm |
| Thin Oil Electric Lubrication Pump | Single phase 220V, 4L detection volume |
Home
Tel
Contact
E-mail