|  Product |  Turning |  CNC Swiss-Type Lathe |  Premium Model |  CKC1112II CNC Swiss-Type Lathe
Premium Model
CKC1112II CNC Swiss-Type Lathe
CKC1112II CNC Swiss-Type Lathe

- FANUC 0i-TF Controller System

- Spindle Bore Dia.15mm

- Adopts 32m/min rapid traverse speed.

- Equipped with a rotatable control panel for better operability.  

- Spindle comes standard with C-axis functionality.  
- Full-travel rotating center support.  

Service Online:

  • Parameter
Item CKC1112II
CNC System Standard: FANUC, Optional: SYNTEC
Machining Range
Maximum Machining Diameter Φ12mm
Maximum Machining Part Length 200mm/clamp
Bar diameter 2.5mm/clamp (without steady rest)
Maximum Front Spindle Feed Length 80mm
Spindle
Spindle Power 2.2/3.7kW (Built-in spindle motor)
Maximum Spindle Through-Hole Diameter Φ15mm
C1/C2 Axis Indexing 0.001°
Maximum Spindle Speed 10000r/min
Maximum Spindle Travel
With Guide Bushing 200mm/clamp
Without Guide Bushing 30mm/clamp (Bar Dia. 2.5 mm/clamp)
Tooling
Maximum Tooling Capacity 13 tools
Spindle-End Tools
Turning Tools (Quantity × Size) 5×□10mm
Side Milling Tools 2×ER11 and 2×ER16
Maximum Drilling Diameter Φ7mm
Maximum Tapping Size M6
Live Tool Speed ER11: 6000r/min, ER16: 4000r/min
Live Tool Power 0.75kW
End Face Fixed Tools
Quantity × Size 4×ER11
Maximum Drilling Diameter Φ7mm
Maximum Tapping Size M6
Others
Rapid Feed Speed 32m/min
Feed Motor Power 0.75kW
Minimum Linear Axis Setting Unit 0.001mm
Cutting Oil Pump Motor Power 0.35kW
Lubrication Oil Pump Motor Power 4W
Cutting Oil Tank Volume 200L
Power Input Capacity 7.5kVA
Air Source Pressure & Flow 0.5MPa, 300Nl/min (max)
Machine Weight ~2000kg
Machine Dimensions (L×W×H) 1695×1205×1830mm
VIEW MORE
  • Product pictures
  • Configuration
Standard Accessories
FANUC CNC System
Nameplate
Transformer
Spindle Air Seal
Pneumatic System
Cooling System
Lubrication System
Material Feeding Device
Rotary Steady Rest Drive Device
Rotary Steady Rest
Live Tool Drive Device
Spindle C-Axis Function
Leakage Protection
LED Lighting
Machine Tool Three-Color Alarm Light
Optional Accessories
Name Remarks
Material Feeder Enables automatic feeding; when one bar is finished, it automatically switches to the next.
Flow Detection Device Used to check if the coolant oil flow is normal.
Chip Conveyor Automatically collects waste chips during the machining process.
Rear-Powered Tool Drive Device Enables milling on the backside of the workpiece.
Medium-High Pressure Cooling System Used for machining difficult parts, improving cooling and chip removal efficiency. Typically offers 70 or 100 bar pressure options.
Oil Mist Purification Device Removes oil mist generated in the machining area, usually used with high-pressure systems.
Internal Cooling System for Spindle Selected based on different operating environments and requirements.
Cut-Off Tool Breakage Detection Primarily monitors the status of the cut-off tool to prevent damage to other tools and the machine.
VIEW MORE